Showing 21–30 of 30 results
-
3M Half Facepiece Reusable Respirator 7503 Respiratory Protection Large, 1/PACK
$87.00Quick View- Soft, silicone facepeice for comfort and durability
- Drop down feature for added convenience during breaks
- Thin nose bridge area for reduced pressure and improved comfort
- 3M Cool Flow Exhalation valve offers reduce breathing resistance
- Respirator design helps reduce fogging when wearing eye protection
- Flexible system for use with 3M gas, vapour and particulate cartridges and filters
- Maintainable through a range of spare parts
-
3M Particulate Filter 2125 P2 1 Pair/Pack
$22.00Quick ViewProvides protection against: Particulates (P2).
Protection Factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
– With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
– With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WESCommon Applications/Hazards:
- Made from 3M high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
- Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series
Suggested Applications
- Common Applications/Hazards: For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete
-
3M Particulate Filter 2128 GP2 with Nuisance Level Organic Vapour/Acid Gas Relief 1 Pair/Pack
$27.00Quick ViewProvides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure.
Protection Factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
– With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
– With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES
– Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
– Ozone up to 10 x WES
– Offers relief from acid gases and organic vapours at levels below the WESCommon Applications/Hazards:
*Nuisance Levels are those levels below the Workplace Exposure Standard (WES).
Common Applications/Hazards:
- Made from 3M high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
- Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series
Suggested Applications
- Common Applications/Hazards: For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure <1.3 Pa @ 25°C
-
3M Particulate Filter 2138 GP2/GP3 with Nuisance Level Organic Vapour/Acid Gas Relief 1 Pair/Pack
$31.00Quick ViewProvides protection against: Particulates (P2/P3*), Ozone and Nuisance Level** Acid Gas & Organic Vapours with Low Vapour Pressure. * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. **Nuisance Levels are those levels below the Workplace Exposure Standard (WES).
Protection Factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
– With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
– With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES
– Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
– Ozone up to 10 x WES
– Offers relief from acid gases and organic vapours at levels below the WESCommon Applications/Hazards:
- Made from 3M high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
- Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series
Suggested Applications
- Common Applications/Hazards: For protection against toxic particles such as mould remediation. Also for nuisance level* acid gases and organic vapours with low vapour pressure <1.3 Pa @ 25°C
-
3M Reusable Half Face Mask Medium 6502QL 1/PACK
$62.00Quick View- Reusable respirator with quick latch drop down mechanism for easy on and off as wearers move in and out of contaminated areas
- No need to remove your safety helmet or faceshield when lowering or raising your respirator
- Resilient silicone faceseal helps provide comfort, durability, and stability with a soft but firm seal
- Exhalation valve cover helps direct exhaled breath and moisture downward to reduce fogging of eyewear and grinding and welding shields
- Low profile half facepiece design offers a wider field of view and better compatibility with welding and grinding shields
- 3M™ Cool Flow™ Valve provides easier breathing and reduced heat and moisture build-up
- Adjustable head harness assembly offers improved fit and comfort
- Bayonet connection fitting system to a broad range of filters to protect against gases, vapours and particulates
-
3M Ultimate FX FF-403 Series Full Facepiece Respirators LARGE
$430.00Quick View- Recommended applications include assembly, chemical cleanup/handling, furnace operations, grinding, laboratories, machining, masonry, painting, sanding, sawing, and more
- Meets the requirements of ANSI Z87.1-2003 standard for eye and face protection
- Large lens for excellent field of vision, and treated with Scotchgard™ Protector to help cause some liquids to bead up for easier removal
- Silicone face seal helps provide comfort and durability, and is easy to clean
- Six-strap harness helps provide a secure comfortable fit
- Use with 3M™ Particle Filters 2000, 2200, 7000, or 5000 Series to help filter certain particulates
- Use with 3M 6000 Series Gas/Vapour Cartridges to help filter a broad range of gases and vapours
- Use with 3M 6000 Series Combination Cartridges to help filter particulates in addition to gases and vapours
- Compatible with 3M™ TR-600 and TR-800 powered air and Dual Airline supplied air systems against a variety of gases, vapours, and particulate hazards
- Head cradle helps reduce pressure points and hair pulling
- For workplace/occupational use only
-
3M™ Reusable Half Face Mask 6503QL Large 1/PACK
$62.00Quick View- Reusable respirator with quick latch drop down mechanism for easy on and off as wearers move in and out of contaminated areas
- No need to remove your safety helmet or faceshield when lowering or raising your respirator
- Resilient silicone faceseal helps provide comfort, durability, and stability with a soft but firm seal
- Exhalation valve cover helps direct exhaled breath and moisture downward to reduce fogging of eyewear and grinding and welding shields
- Low profile half facepiece design offers a wider field of view and better compatibility with welding and grinding shields
- 3M™ Cool Flow™ Valve provides easier breathing and reduced heat and moisture build-up
- Adjustable head harness assembly offers improved fit and comfort
- Bayonet connection fitting system to a broad range of filters to protect against gases, vapours and particulates
-
DISPOSABLE FACE MASK SURGICAL STERILE SINGLE USE ONLY – 50/BOX
$65.00Quick View- Protection against Dust, Pollen & Airborne Droplets.
- 3 Layer Filtration construction.
- Adjustable Nose Bridge & Earloops for optimal fit.
- Disposable , Single Use.
- Bacterial Filtration Efficiency (BFE) 95%
- Qty/Box – 50 pieces
-
Dust Masks P2 with Valve
$35.00Quick View- P2: Certified to AS/NZS 1716:2012 Respiratory Protective Devices
- P2 disposable respirator for protection against mechanically and thermally generated particles
- Lightweight cupped design for comfortable extended wear
- Dual latex free elastic straps for ease of donning and doffing
- ProValve exhalation valve for decreased breathing resistance and heat stress
- Nose flange for increased protection and facial fit
- Resealable bag for hygienic storage
