3M 6051 A1 Organic Vapour Cartridge 1 Pair

CARTRIDGES & FILTERS

A respirator cartridge or canister is a type of filter that removes gases, volatile organic compounds (VOCs), and other vapours from breathing air through adsorption, absorption, or chemisorption. It is one of two basic types of filters used by air-purifying respirators.

Showing all 11 results

  • 0 out of 5

    3M 6051 A1 Organic Vapour Cartridge 1 Pair

    $25.00

    Provides protection against Organic Vapours (boiling point > 65ºC) (A1). Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. 

    • 3M™ Bayonet Connection System ensures precise and secure locking
    • Low profile and well balanced twin filter design
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators

    Specifications:

    Cartridge or Filter Assigned Colour Coding: Brown

    Cartridge or Filter Rating: A1

    Cartridge or Filter Type: A1

    Filter Type: Gas & Vapour Cartridge

    Gas & Vapour Protection Type‎: Organic Vapours bp>65 degrees°C

    Protection Factors
    Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

    This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:

    • With a 3M 6000/7500 Series Half Face Respirator: for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower
    • With a 3M 6000/7800 Series Full Face Respirator: 50 x WES or 1000 ppm, whichever is the lower

    Common Applications/Hazards: For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK. Also degreasing, mixing, using paint thinner, lacquers and glues

    Compliance: Complies with AS/NZS 1716:2012

    Quick View
  • 0 out of 5

    3M 6054 Ammonia and Methylamine Cartridge (K1) – 1 PAIR/PACK

    $29.00

    Provides protection against: Organic Vapours (boiling point > 65ºC) (A2)

    The 3M™ Cartridges 6000 Series attaches to the 3M™ Half and Full face respirators, they are lightweight and well balanced when fitted to the respirator.

    • 3M™ Bayonet Connection System ensures precise and secure locking
    • Low profile and well balanced twin filter design
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
    • Lightweight with low breathing resistance

    Suggested Applications

    • Common Applications/Hazards: – Exposed to higher concentrations where class 2 protection is required – For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK. Also degreasing, mixing, using paint thinner, lacquers and glues
    Quick View
  • 0 out of 5

    3M 6055 Organic Vapour Cartridge Filter A2 -1PAIR/PACK

    $28.00

    Provides protection against: Organic Vapours (boiling point > 65ºC) (A2)

    The 3M™ Cartridges 6000 Series attaches to the 3M™ Half and Full face respirators, they are lightweight and well balanced when fitted to the respirator.

    • 3M™ Bayonet Connection System ensures precise and secure locking
    • Low profile and well balanced twin filter design
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
    • Lightweight with low breathing resistance

    Suggested Applications

    • Common Applications/Hazards: – Exposed to higher concentrations where class 2 protection is required – For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK. Also degreasing, mixing, using paint thinner, lacquers and glues
    Quick View
  • 0 out of 5

    3M 6057 Organic Vapour/Acid Gas Cartridge A1B1E1 – 1 PAIR

    $29.00

    Pair of A1B1E1 Filters to suit 3M™ Reusable Respirators (part number 6057).

    The 3M 6057 filters provide high level protection when working with solvents or acid gases.

    • Organic Vapour (boiling point >65°C), Inorganic Vapour and Acid Gas protection
    • A1B1E1 filter class rating
    • Useful when working with solvents and/or acid gases
    • Suitable for use with 3M reusable respirators
    • Replace when you notice the odour or taste of the contaminant/s
    • If required, can also be used with 3M 5925 or 5935 filters and 501 retainers for particulate protection.

     

     

    The 3M 6057 respirator filters give you the benefit of a combination of Organic Vapour (A1), Inorganic Vapour (B1) and Acid Gas (E1) protection. This level of filtration is ideal for working with solvents or acid gases such as toluene, hydrogen chloride, sulfur dioxide, bromine or chlorine. Common applications may include using paint thinners, manufacturing fertilisers, cleaning with acid or when degreasing.

    The specially treated carbon grain inside the 3M 6057 respirator filters actively soaks up the gas and vapour molecules mentioned above. The high efficiency filters connect to the bayonet fittings on the 3M reusable respirators, for easy use and changeover.

    Quick View
  • 0 out of 5

    3M 6059 Multi Gas/Vapour Cartridge Filter A1B1E1K1 – 1 Pair/Pack

    $42.00

    Provides protection against: Organic Vapours (boiling point > 65ºC) Inorganic & Acid Gases, Ammonia and Methylamine (A1B1E1K1)

    The 3M™ Cartridges 6000 Series attaches to the 3M™ Half and Full face respirators, they are lightweight and well balanced when fitted to the respirator.

    • 3M™ Bayonet Connection System ensures precise and secure locking
    • Low profile and well balanced twin filter design
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
    • Swept-back design allows an enhanced field of view and comfort

    Suggested Applications

    • Common Applications/Hazards: For protection when working with a variety of chemicals such as organic vapours, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulphide, ammonia, methylamine, and formaldehyde
    Quick View
  • 0 out of 5

    3M 6075 Formaldehyde/Organic Vapour Cartridge Filter A1 Form 1 Pair/Pack

    $28.00

    Provides protection against: Organic Vapours (boiling point > 65ºC) and Formaldehyde (A1Form)

    The 3M™ Cartridges 6000 Series attaches to the 3M™ Half and Full face respirators, they are lightweight and well balanced when fitted to the respirator.

    • 3M™ Bayonet Connection System ensures precise and secure locking
    • Low profile and well balanced twin filter design
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
    • Swept-back design allows an enhanced field of view and comfort

    Suggested Applications

    • Common Applications/Hazards: For protection when working with solvents and formaldehyde such as chemical processing, plastic production, fibreboard manufacturing, healthcare and laboratory work
    Quick View
  • 0 out of 5

    3M Particulate Filter 2125 P2 1 Pair/Pack

    $19.00

    Provides protection against: Particulates (P2).

    Protection Factors
    Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

    This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
    – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
    – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES

    Common Applications/Hazards:

    • Made from 3M high performance filter media for effective filtration efficiency
    • Lightweight and provides low breathing resistance
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
    • Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series

    Suggested Applications

    • Common Applications/Hazards: For protection against certain particles, dusts, mists and fumes such as sanding, grinding, cutting, drilling metal, masonry, wood and concrete
    Quick View
  • 0 out of 5

    3M Particulate Filter 2128 GP2 with Nuisance Level Organic Vapour/Acid Gas Relief 1 Pair/Pack

    $24.00

    Provides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure.

    Protection Factors
    Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

    This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
    – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
    – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES
    – Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
    – Ozone up to 10 x WES
    – Offers relief from acid gases and organic vapours at levels below the WES

    Common Applications/Hazards:

    *Nuisance Levels are those levels below the Workplace Exposure Standard (WES).

    Common Applications/Hazards:

    • Made from 3M high performance filter media for effective filtration efficiency
    • Lightweight and provides low breathing resistance
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
    • Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series

    Suggested Applications

    • Common Applications/Hazards: For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure <1.3 Pa @ 25°C
    Quick View
  • 0 out of 5

    3M Particulate Filter 2135 P2/P3 1 Pair/Pack

    $25.00

    Provides protection against: Particulates (P2/P3*). * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator.

    Protection Factors
    Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

    This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
    – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
    – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES

    Common Applications/Hazards:

    • Made from 3M high performance filter media for effective filtration efficiency
    • Lightweight and provides low breathing resistance
    • 3M™ Bayonet Connection System ensures precise and secure locking
    • Low profile and well balanced twin filter design
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators

    Suggested Applications

    • Common Applications/Hazards: For protection against toxic particles such as asbestos (refer to local government guidelines). Also for mould remediation and Beryllium
    Quick View
  • 0 out of 5

    3M Particulate Filter 2138 GP2/GP3 with Nuisance Level Organic Vapour/Acid Gas Relief 1 Pair/Pack

    $28.00

    Provides protection against: Particulates (P2/P3*), Ozone and Nuisance Level** Acid Gas & Organic Vapours with Low Vapour Pressure. * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. **Nuisance Levels are those levels below the Workplace Exposure Standard (WES).

    Protection Factors
    Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

    This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
    – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
    – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES
    – Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
    – Ozone up to 10 x WES
    – Offers relief from acid gases and organic vapours at levels below the WES

    Common Applications/Hazards:

    • Made from 3M high performance filter media for effective filtration efficiency
    • Lightweight and provides low breathing resistance
    • Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators
    • Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series

    Suggested Applications

    • Common Applications/Hazards: For protection against toxic particles such as mould remediation. Also for nuisance level* acid gases and organic vapours with low vapour pressure <1.3 Pa @ 25°C
    Quick View
  • 0 out of 5

    3M™ Filters for Dust 5925 – 10PAIRS/BOX

    $9.00

    Provides protection against: Particulates (P2), including those containing oil.

    Protection Factors
    Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

    This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
    – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
    – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES

    Common Applications/Hazards:

    • To be fitted with the 3M 6000 Series Cartridges and the 3M 501 Retainer
    • To be fitted with the 3M 6000 Series Cartridges and the 3M 501 Retainer
    • Can be used with any 3M™ Reusable Masks that feature a bayonet-style connection
    • Bayonet fitting allows filters to be clicked into place for ease of fitting
    Quick View
Top
X