BUFFING WHEEL RAKE FOR METAL POLISHING

POLISHING COMPOUND

Showing all 13 results

  • 0 out of 5

    BUFFING WHEEL RAKE FOR METAL POLISHING

    $25.84

    A buffing wheel rake is used to clean up the edge of an Airway Buffing Wheel while it’s running on a lathe or an angle grinder.

    The buffing wheel should be spinning at it’s normal speed and the rake should be held securely when held up to a stationary bench grinder or lathe.

    On a grinder, please exercise caution when raking.

    We recommend using your feet to hold the rake to the ground and holding the angle-grinder to the rake to remove compound and soften the edges.

    Quick View
  • 0 out of 5

    INSERTABLE FLANGE SET FOR RENEGADE AIRWAY BUFF WHEEL

    $62.64

    INSERTABLE FLANGE SET FOR RENEGADE AIRWAY BUFF WHEEL

    Quick View
  • 0 out of 5

    M14 FITTING FOR RENEGADE AIR WAY BUFF WHEEL

    $22.24

    M14 FITTING FOR ALL YOUR RENEGADE AIRWAY BUFF WHEEL

    Quick View
  • 0 out of 5

    RENEGADE CUTTING COMPOUND BAR- SUPERCUT MG (BLACK)

    $10.52

    * WORKS on Stainless Steel as well as Aluminium.

    * WORKS on cast alloy, billet alloy and extrusion

    * WORKS on Bull Bars, Nudge bars and racks

    This is a brother product to Ultracut 5. In polishing there are many ways to get the job done, sometimes it comes down to personal preference, sometimes it’s about the tools you need to use and there are a huge amount of variables.
    Some have asked why we have these tow compounds that are so similar, the answer is easy. Supercut has a very similar feel of cut to our Ultracut, but it has a slightly more greasy formulation, meaning it’ll cling to the mop and to the work-piece a little better, some people like this and some people like it a little drier, we like to make sure we’ve catered for both camps.

    Quick View
  • 0 out of 5

    RENEGADE CUTTING COMPOUND BAR- T2 TRIPOLI ( BROWN )

    $9.40

    WORKS on Stainless Steel as well as Aluminium.

    * WORKS on cast alloy, billet alloy and extrusion

    * WORKS on Bull Bars, Nudge bars and racks

    This product is an intermediate cutter and finisher. For example, if you have say Aluminium, Brass or even Steel and Stainless, that has light marking or a scratch pattern from an abrasive belt or disc, T2 is used to remove the scratches and actually leaves quite a good finish on its own.
    For the most part we’d see this type of product used to cut, then depending on the substrate, a secondary finisher like Infinity Green or 3 Series would be used, to bring up the final bright finish. A liquid version of this product is also available -LIQUID TRIPOLI M4

    Quick View
  • 0 out of 5

    RENEGADE CUTTING COMPOUND BAR- ULTRA CUT 5 (BLACK)

    $11.67

    * WORKS on Stainless Steel as well as Aluminum.

    * WORKS ON cast alloy, billet alloy and extrusion

    * WORKS ON Bull Bars, Nudge bars and racks

    This compound is a workhorse, manufactured to cut. Ultracut has the ability to removes scratches and blemishes, sanding marks and tea staining with ease.
    While it can be used on non-ferrous metals, we find that a majority of the product is used in the stainless fabrication areas, plating and metal component polishing sectors.
    Ultracut has great adhesion on the mops and buffs, isn’t too greasy and is super easy to use. Most of our customers will use this product on our range of standard or treated sisal mops, having said that, we’ve also see Ultracut used on our orange or red treated Airway buffs, to cut and clean.

    Quick View
  • 0 out of 5

    RENEGADE POLISHING COMPOUND BAR- 3 SERIES ( YELLOW )

    $25.40

    * WORKS on Stainless Steel as well as Aluminium.

    * WORKS on cast alloy, billet alloy and extrusion

    * WORKS on Bull Bars, Nudge bars and racks

    3-Series compound is one of our favourites, formulated with stainless in mind, this product has been rated by many professionals as one of the best they’ve ever used.
    3-Series is a final finisher, it’s been used where our customers are looking for the highest blemish and streak free finish they can get.
    It’s got just the right amount of greasy feel, so you don’t need to use very much to get that perfect shine, Now while 3-Series was formulated for stainless, customers are also loving it for brass and aluminium, and we’ve found it’s best used on our Domet Flannel Airway buff’s, Swansdown loose leaf buffs, standard Coolair buffs, we’ve also used it on radial and cross stich rag mops.

    Quick View
  • 0 out of 5

    RENEGADE POLISHING COMPOUND BAR- COMPETITION PURPLE ( PURPLE )

    $47.17

    * WORKS on Stainless Steel as well as Aluminium.

    * WORKS ON cast alloy, billet alloy and extrusion

    * WORKS ON Bull Bars, Nudge bars and racks

    Competition Purple compound is one of our favourites, formulated with stainless in mind, this product has been rated by many professionals as one of the best they’ve ever used.
    Competition Purple is a final finisher, it’s been used where our customers are looking for the highest blemish and mirror finish they can get.
    It’s got just the right amount of greasy feel, so you don’t need to use very much to get that perfect shine, Now while Competition Purple was formulated for stainless, customers are also loving it for brass and aluminium, and we’ve found it’s best used on our Domet Flannel Airway buff’s, Swansdown loose leaf buffs, standard Coolair buffs, we’ve also used it on radial and cross stich rag mops.

    Quick View
  • 0 out of 5

    RENEGADE POLISHING COMPOUND BAR- EDR ( PINK )

    $26.00

    Our new EDR compound is quite unique. EDR is a carefully formulated cutting product, designed to remove scratch from Alloy or stainless (600 grit up) and leave a much better finish that our Tri-Cut, brown bar product. it can also be used as a one step product on any of our Airway buffs, but we’ve had great feedback that it performs well on our soon to arrive Flame Cut red treated Airway buffs as a first step cutter.

    Quick View
  • 0 out of 5

    RENEGADE POLISHING COMPOUND BAR- INFINITY BLUE ( BLUE )

    $25.46

    * WORKS on Stainless Steel as well as Aluminium.

    * WORKS on cast alloy, billet alloy and extrusion

    * WORKS on Bull Bars, Nudge bars and racks

    This compound has been a favorite for those of you finishing alloy, Truck bars, Bull Bars, ladder racks etc. It also works very well on stainless as a final finisher. With a deep crisp shine and the ability to be able to remove fine blemishes, Infinity Blue can be used on its own if you’re just doing a quick touch up to alloy that has gone off to bad, or as a second step after sanding and cutting back any surface.
    We’ve found it works very well on our Yellow Airway buffs, standard Coolair mops and stitched rag mops.

    Quick View
  • 0 out of 5

    RENEGADE POLISHING COMPOUND BAR- INFINITY GREEN

    $19.10

    * WORKS on Stainless Steel as well as Aluminum.

    * WORKS ON cast alloy, billet alloy and extrusion

    * WORKS ON Bull Bars, Nudge bars and racks

    This compound has been a favorite for those of you finishing alloy, Truck bars, Bull Bars, ladder racks etc. It also works very well on stainless as a final finisher. With a deep crisp shine and the ability to be able to remove fine blemishes, Infinity Green can be used on its own if you’re just doing a quick touch up to alloy that has gone off to bad, or as a second step after sanding and cutting back any surface. We’ve found it works very well on our Yellow Airway buffs, standard Coolair mops and stitched rag mops.

    Quick View
  • 0 out of 5

    RENEGADE POLISHING COMPOUND BAR- SUPER G ( GREEN )

    $20.95

    * WORKS on Stainless Steel as well as Aluminium.

    * WORKS on cast alloy, billet alloy and extrusion

    * WORKS on Bull Bars, Nudge bars and racks

    SUPER G is a product very similar in many ways to our Infinity Green, but the feedback we’ve got so far is that Super G is a little drier in its formulation, a little less greasy.
    Some polishers prefer this type of cut, and they get great results.
    We’ve also seen Super G become very popular with the chrome platers, they like it because they get the shine and colour they’re looking for, yet clean up is easier when items go back through the plating tanks.

    Quick View
  • 0 out of 5

    RENEGADE POLISHING COMPOUND BAR- WHITE LIGHTNING ( WHITE )

    $19.58

    * WORKS on Stainless Steel as well as Aluminum.

    * WORKS ON cast alloy, billet alloy and extrusion

    * WORKS ON Bull Bars, Nudge bars and racks

    White lightning is another fine finisher product. We bench marked this product in the area of surgical tool manufacture.

    This industry required a dry, very fine cutting product that would leave a surface value that was second to none and could pass the most stringent visual inspections that are critical to this type of industry.

    We also found for fine finishing of perspex.

    White Lightning delivered again, not what it was designed for at all, yet it was magnificent.

    Quick View
Top
X